49 WINCHESTER ST, NEWTON, MA 02461

Unilock®

UNILOCK PORCELAIN TILE PAVERS

Having led the landscape industry with the best selection of manufactured hardscape products, Unilock now offers an impressive line of premium Porcelain Tile. Suitable for wood deck and concrete overlays, Unilock porcelain tile offers an array of unique colors and design options.Porcelain is a thinly manufactured slab with sharp zero-bevel edges. Porcelain can be used residentially or commercially, but is not suitable for any vehicular applications. Porcelain can also be used in commercial roof deck pedestal applications where a thinner/lighter module is specified. Consult the project engineer for specific installation instructions for roof deck applications.

*For complete installation instructions click here
 or see our Guides page.


.
Contact Us MA Landscaping Supply
  • Colors
  • Sizes
  • Applications

Porcelain Pavers in Eikon Titani Color          Porcelain Pavers in Rimini by Unilock
Eikon Titanio                                                  Rimini

PorcelainStone in Travstone Beige Delconca by Unilock          Unilock Delconca Porcelain Paver Travstone Noce Color Swatch
Travstone Beige                                          Travstone Noce 

Porcelain Paver in Eikon Gea Color by Unilock           Porcelain Paver in Graustein Color by Unilock
Eikon Gea                                                          Graustein

Porcelain Pavers in Arbor Bianco Delconca by Unilock          Porcelain Pavers in Arbor Natural Delconca Color
Arbor Bianco                                                 Arbor Natural

Porcelain Pavers in Arbor Gray Delconca by Unilock          Porcelain Pavers in Gotham Beige Delconca Color
Arbor Gray                                                     Gotham Beige

Porcelain Pavers in Gotham Grey Delconca by Unilock          Porcelain Pavers in Gotham Nero Delconca Color
Gotham Grey                                                  Gotham Nero

Please  Note *The colors shown should only be used as a guide. Final color selections should always be made from actual samples.
OVER CONCRETE INSTALLATION

– Porcelain must be installed on a stable base. The best way to achieve this is to mortar the units on to a poured concrete pad - preferably a new concrete pad, although existing concrete can be used. It is recommended that you have a minimum 4” of ¾” crusher run gravel under the pad for support and drainage, (use any road base gravel in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).
Special Notes: Concrete Direct Overlay
Concrete integrity – concrete must be in good condition, and not crumbling Drainage slope – concrete below must be sloped away from all buildings and structures Base drainage - the area below the concrete must not be subject to frost movement Jointing – Exterior Grade Porcelain grout.
ALTERNATIVE PERMEABLE BASE
– Porcelain may also be installed on a permeable base in climates with little or no freeze-thaw ground movement.
Use a min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)
ALTERNATIVE PERMEABLE BEDDING COURSE
– 1” thick of 1/8” clear open-graded chip stone – (ASTM No. 8 or 9) screeded over base.

ALTERNATIVE HIGH DENSITY FOAM BASE
Products such as Gatorbase or other high-density foam products designed for exterior paving applications can also be used for porcelain installation. In this instance, the tiles sit directly on the foam base material. This eliminates compaction and it eliminates the need for joint grouting a small plastic tab is used to separate the units and keep them from touching each other.
These foam products can be used to replace a substantial portion of the gravel required below the surface but not eliminate it completely. It is recommended that you have a minimum 4” of ¾” crusher run gravel under the pad for support and drainage, (use any road base gravel in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).
HANDLING
– Exercise caution when handling this product, as contact between its zero-bevel edges may cause damage.
EDGE RESTRAINT
– not required when installed over concrete. Use manufacturer’s edge restraint system for high density foam installation.
CLEANERS
– Porcelain cleans with simple soap and water.
CAUTION
– Porcelain can be slippery when wet.

Arbor  Bianco, Natural&nsp;& Gray Dimensions
Unilock Porcelain Tile Paver specifications, dimensions and Sizes

All  Other Porcelain  Dimensions
Unilock Porcelain Delconco Tile specifications, dimensions and Sizes

Approved   Applications:

  • Pedestrian


CONTACT US

​​​​​​​​​​​​​​CALL US TODAY 

617. 467. 4785